Global Supply Chain OSHA Risks When Foreign Suppliers Work in the U.S.

Practice Area:Corporate
Jurisdiction:New York

Global supply chain OSHA liability depends on where work occurs, who controls site safety, and which duties apply to imported products.

An overseas supplier may ship machinery and send technicians to a New York facility while a local subcontractor installs it. The buyer must coordinate these separate roles before work begins. Foreign safety documents and a supply contract alone do not establish compliance at the U.S. workplace.



1. Where Does OSHA Apply in a Global Supply Chain?


Start with the location of the work and the entities performing it. A contract with a U.S. buyer does not automatically place an overseas factory under federal OSHA jurisdiction.


Separate Overseas Production from U.S. Work

Safety at a factory outside OSHA's geographic jurisdiction generally falls under the applicable foreign country's law. A supplier audit may support contractual oversight, but it does not make that factory an OSHA-regulated workplace.

Federal OSHA generally covers private-sector workplaces in New York. The state's PESH program covers state and local government workers. When foreign technicians enter a covered U.S. facility, examine their employer's responsibilities and the host facility's duties for the work actually performed.

Identify Each Company's Role

A foreign parent, U.S. subsidiary, importer, and installation contractor are separate entities whose responsibilities require individual analysis. Common ownership or purchasing power alone does not establish control over workplace safety.

Record who employs the technicians, directs installation, approves equipment changes, and can require hazards to be corrected. Purchasing records identify the commercial chain. Site instructions and actual supervision help establish the safety roles.


2. What Must Be Checked before Imported Products Reach Workers?


A product's acceptance overseas does not resolve the requirements governing its use in a U.S. workplace. Review the equipment or chemical against the applicable OSHA standards before installation or employee exposure.


Imported Machinery and Foreign Installation Teams

For general-industry machinery, 29 C.F.R. § 1910.212 addresses machine guarding. Section 1910.147 governs hazardous energy during covered servicing and maintenance. Determine whether the activity falls under general-industry or construction standards before selecting the applicable requirements.

Ask the foreign manufacturer for guarding drawings, energy-isolation instructions, and installation procedures. For covered work involving outside servicing personnel, § 1910.147(f)(2) requires the host and outside employers to inform each other of their lockout or tagout procedures. The host must ensure its employees understand the outside employer's program restrictions.

Imported Chemicals and Safety Information

Under § 1910.1200, chemical importers have hazard-communication duties, including obtaining or developing safety data sheets for hazardous chemicals they import. Required safety data sheets must be in English. Additional language versions may support employee understanding.

Identify the entity performing the regulatory importer role rather than assuming the customs broker handles workplace safety obligations. Check that the product identifier, label, and safety data sheet match. Employers must provide required hazard training in a language and vocabulary employees understand, including when overseas personnel train a local crew.


3. When Can More Than One Employer Face a Citation?


OSHA's Multi-Employer Citation Policy applies a two-step analysis: identify an employer's role, then assess whether its actions satisfied the associated duties. This differs from a general employment-law inquiry into joint-employer status.

Employer roleQuestion for a cross-border project
CreatingDid the overseas installation employer create the hazardous condition?
ExposingWhose employees encountered the hazard during installation or operation?
CorrectingWhich employer was responsible for correcting the hazard?
ControllingWhich employer could correct violations or require others to do so?

Creating

  • Question for a cross-border projectDid the overseas installation employer create the hazardous condition?

Exposing

  • Question for a cross-border projectWhose employees encountered the hazard during installation or operation?

Correcting

  • Question for a cross-border projectWhich employer was responsible for correcting the hazard?

Controlling

  • Question for a cross-border projectWhich employer could correct violations or require others to do so?

Examine Authority and Actual Conduct

An employer may occupy several roles. A controlling employer's authority can arise from the contract or its conduct at the site. OSHA expects reasonable care to prevent and detect violations, with duties assessed according to the employer's role.

Review instructions from overseas project managers alongside local inspection records. An employer whose workers face a hazard cannot simply defer to a foreign manufacturer's approval. Its protective duties depend on its authority and the circumstances, including whether workers must be removed from danger.


4. How Should Contracts Allocate Cross-Border Safety Tasks?


Diagram: Four parallel contract reviews cover technical records, corrective authority, overseas coordination, and financial recovery.
Diagram: Four parallel contract reviews cover technical records, corrective authority, overseas coordination, and financial recovery.

The supply agreement, installation subcontract, and site procedures should identify who performs each safety task. A promise that the supplier will “comply with all laws” leaves practical questions unanswered.


Assign Deliverables and Corrective Authority

Require the overseas supplier to deliver necessary technical records before the relevant work starts. Specify who reviews them, who pays for required modifications, and when an unresolved safety issue permits work to stop.

Address lower-tier subcontractors, translated instructions, access to engineers, and incident cooperation. Set response times that account for time-zone differences. The U.S. team needs a workable escalation route when the engineer who understands the equipment is abroad.

Check Indemnity, Insurance, and Dispute Terms

Indemnity allocates contractual losses but does not eliminate an employer's OSHA duties. For covered construction-related agreements, New York General Obligations Law § 5-322.1 restricts indemnification for the indemnitee's own negligence.

Review the policy's coverage territory, exclusions, and applicable endorsements. Do not assume it covers U.S. claims or OSHA penalties. Governing-law and dispute-resolution terms also need review alongside the supplier's location and available assets. A reimbursement clause has limited practical value if recovery abroad is difficult.


5. What Should a U.S. Company Preserve after an Inspection?


Preserve relevant foreign and domestic records promptly, including supplier drawings, shipment versions, installation changes, training records, and communications with overseas managers. Retain original-language files with reliable translations and identify the person who can explain each technical document.

For a federal OSHA citation, 29 C.F.R. § 1903.17 generally allows 15 working days after receipt to submit a written notice of contest. An informal conference does not extend that deadline. Internal approval from an overseas headquarters must fit within the U.S. response period.

A legal review should connect the cited condition to the responsible entity, applicable standard, and available evidence. SJKP LLP can assist with reviewing these issues alongside the supply agreement and installation records.


19 Aug, 2026


The information provided in this article is for general informational purposes only and does not constitute legal advice. Prior results do not guarantee a similar outcome. Reading or relying on the contents of this article does not create an attorney-client relationship with our firm. For advice regarding your specific situation, please consult a qualified attorney licensed in your jurisdiction.
Certain informational content on this website may utilize technology-assisted drafting tools and is subject to attorney review.